|author||Jean Delvare <firstname.lastname@example.org>||2009-10-04 22:53:41 +0200|
|committer||Jean Delvare <email@example.com>||2009-10-04 22:53:41 +0200|
ds2482: Discard obsolete detect method
There is no point in implementing a detect callback for the DS2482, as this device can't be detected. It was there solely to handle "force" module parameters to instantiate devices, but now we have a better sysfs interface that can do the same. So we can get rid of the ugly module parameters and the detect callback. This shrinks the binary module size by 21%. Signed-off-by: Jean Delvare <firstname.lastname@example.org> Acked-by: Ben Gardner <email@example.com>
Diffstat (limited to 'Documentation/w1')
1 files changed, 3 insertions, 3 deletions
diff --git a/Documentation/w1/masters/ds2482 b/Documentation/w1/masters/ds2482
index 9210d6fa5024..299b91c7609f 100644
@@ -24,8 +24,8 @@ General Remarks
Valid addresses are 0x18, 0x19, 0x1a, and 0x1b.
However, the device cannot be detected without writing to the i2c bus, so no
-detection is done.
-You should force the device address.
+detection is done. You should instantiate the device explicitly.
-$ modprobe ds2482 force=0,0x18
+$ modprobe ds2482
+$ echo ds2482 0x18 > /sys/bus/i2c/devices/i2c-0/new_device